www.HydroxyGarage.com introduces complete range of HHO products to help you save $$$$ on your fuel bill and protect the environment.

We offer complete range of HHO Electronics, HHO Cell and Spares.

 

     PWM / DC Gated Pulse Generator

Modified Replication of Dave Lawton's Pulsing Circuit’s Patent.

#   Supply voltage 12V DC.
#   Dimensions approx. 5 in x 7 in x 3.35 in.
#   Plug and Play type.

     SPECIFICATIONS

#   Input : 12VDC
#   Output : 12 VDC, 6A max.
#   Variable Frequency Range : 0 – 500 KHz in 3 selectable steps.
#   Full Range Duty Cycle : 0% - 100%
#   Gating : Yes, when selected.


This unit must be connected to a 12v supply only.

 

     FEATURES

#   Quality Single-turn potentiometers for precise adjustment.
#   3 selectable frequency range for fine adjustment.
#   Protected against Back EMF in case you are using a coil.
#   Stripped down model occupies less space and gives better visibility.
#   Extra Fuse is included.
#   A Heatsink and Fan (12VDC) included.

 

BUY NOW for US$174.5 only!

Shipping:  $25

LIMITED TIME OFFER

ORDER 3 Kits (for your friends) and 4th is absolutely FREE.

 


     HOW DO WE COMPARE WITH OTHERS ??

                     FEATURES 

OURS

OTHERS

  Power On/Off

YES

YES

  Adjustable Oscillator Frequency

YES

YES

  Adjustable Oscillator Duty Cycle

YES

NO

  Gating On/Off

YES

NO

  Adjustable Gating FrequencyYES

YES

NO

  Adjustable Gating Duty Cycle

YES

NO

  Built-in Cooling Fan & Heatsink

YES

NO

  Frequency Range 0 Hz – 500 KHz

YES

NO

  1 Yr. Warranty for Supply of Parts/Repair

YES

NO

  Free Online Technical Consultancy

YES

NO

  Product Research, Development and

  Manufacturing - All Under One Roof

YES

NO

  Support for Prototyping of Your Designs

YES

NO

  Suitable for Researchers & Hobbyist alike

YES

NO

  Discount to Past Customers

YES

NO

Q1.  Is  PWM really useful ?  


Ans.  Yes, if you wish to employ advanced electrolysis for your HHO project. No, if you wish to continue using conventional electrolysis.

Conventional Electrolysis uses brute force of electricity to dissociate water molecule into Hydrogen and Oxygen. Advanced electrolysis being researched as HHO system thru PWM uses a combination of square wave DC, frequency of pulses, duty cycle, etc.. This prevents thermal runaway (rise of temperature of water) and increases the efficiency of operation giving more gas output compared to conventional electrolysis.

Remember, we are not selling a PWM, but a DC Gated Pulse Generator.

 Q2.  How does a PWM compare with DC Gated Pulse Generator ?  


Ans1 DC Gated Pulse Generator is designed for serious HHO Researchers and Hobbyist.

We are not here to make quick bucks by making cheap products to compete with others !!!  We are a team of qualified Engineers and Physicist with 12-15 years of industry experience in research, product development and manufacturing. We are not here to make something on some stray ideas and leave it to you to make it work. We neither sell plans nor designs. We look at the problem, understand  it, think about a solution, do experiment, and if successful present it to you to evaluate it..

Stan Meyer did not consume loads of Amp to generate Hydroxy. Challenge is to consume less Amp (typically less than 1 or 2 Amp) at lesser voltage (e.g. 12 VDC) and produce great volume of Hydroxy enough to run your engine typically, 1, 2 or more LPM.

If you subscribe to this idea, this device is perfect for you.


Ans2 

This device gives you the power of Electronics Engineering that successful researchers like Stan Meyer, Dave Lawton, Ravi Raju and others used in their experiments. Pls. refer Stan Mayer’s patents for more details.

What this device offers is complete control on the process. For example, Oscillator and Gating can be controlled for frequency and duty cycle. Oscillator can be run without introducing Gating. Frequency can be varied from 0 -500 KHz smoothly using a 3 selectable sub-range for finer tuning. Inbuilt Amp display to give you accurate reading of current being consumed.

 
Ans3

HHO technology is evolving and there are no set formulas explaining relationship between various parameters.

It is a fact that, spacing between electrodes, properties of water / electrolyte, ambient temperature / pressure, type of current applied, voltage, etc. greatly affect the electrolysis process. In every HHO cell, these parameters vary and one need to find the exact balance among various parts and parameters. In a given test setup, after setting the material and physical properties of water, electrolyte, electrodes and cell housing only thing one can modify is the frequency .
 

If you believe that this is not conventional electrolysis and keep your mind open to wild possibilities (except that it should work at low wattage (Volt x Amp), this device is a suitable tool to explore the unknown…

 will put you in command…

Q3.  What guarantee that this will not burn ?

Ans. NO GUARANTEE.

Not because the device is not rated for the specified values, but since different HHO generators behave differently for various reasons leading to failure of a PWM.

Many people use catalysts like KOH or NaOH to achieve better LPM (Liter per Minute) of HHO production. A PWM does its job perfectly as long as concentration of catalyst in the water is optimal. However in practice, after few hours of operation some of the water in HHO cell gets consumed (converted into HHO) resulting in increased concentration of catalyst which in turn increases Ampere draw beyond specified value causing a PWM to fail. Sometimes, HHO cell too gets damaged due to increase in temperature of water, affecting the HHO production.

Many hobbyists and amateurs are not aware of this behavior of HHO cell while using catalysts and see their PWM burned.

We stand guaranteed for the performance of our DC Gated Pulse Generator as specified. However, you must understand that there are many reasons for the device to fail apart from higher Amp, like back emf, component failure, human errors, etc..  

There is practically no scope for failure as though the device is designed to work at 6A without the heat sink and fan, we have included it to safeguard it when ambient temperature is higher. The product also has protection against back emf when you are using a coil i.e. inductive load upto certain low frequencies.

For a catalyst HHO cell, we need an intelligent Pulsing Circuit which monitors several key parameters of the electrolysis process and controls the operation. One such product is being built by  www.HydroxyGarage.com.

 

NOTE

HHO technology is new and should be considered experimental in nature.  As with all HHO equipment, this device is also planned for upgrade continuously, and this is not a final product.  Installing this device along with any other experimental equipment/system for whatever application, buyer must use proper judgment and exercise great care.

BUSINESS PARTNERS

We are looking for Partners / Distributors / Sales Professionals who have interest in in Alternative Energy products. If interested, pls. visit our website and write to us.

If you are an Investor interested in Alternative Energy venture, pls. do contact us for an interesting project opportunity.

WHO WE ARE ?
We are a team researchers with qualifications in Physics and Electronics and combined industry experience of 40 years into product design/ engineering, development, manufacturing and sourcing. Our skills in power electronics and manufacturing stands us apart from others.

At HydroxyGarage, we focus on converting prototypes into successful products, thereby making a slow but solid progress.

Our primary goal is to develop a system which can run your car on HHO only. Stan Meyer could do this, so should we.
 

PACKAGING
The product is packed in a corrugated paper box with thermocol box inside.

SHIPPING 

Shipped FREE to worldwide destinations by Postal Mail service.

 

 

 

 

DISCLAIMER :

THIS DEVICE IS BEING SOLD AS AN EXPERIMENTAL ITEM ONLY.


THIS PRODUCT WILL NOT PRODUCE LARGE AMOUNTS OF HYDROGEN AND OXYGEN, JUST BY CONNECTING IT TO THE PWM OR ELECTRICAL SUPPLY. THERE ARE 100S POSSIBILITIES AND THIS PRODUCTS JUST HELPS YOU TO EXPLORE SOME OF THEM.


THERE ARE DANGERS OF DEVICE FAILURES, BURN OUT , ACCIDENT DURING YOUR EXPERIMENT, IF NOT HANDLED PROPERLY.


TRYING TO PRODUCE HYDROGEN AND OXYGEN FROM WATER IS HIGHLY DANGEROUS.
SELLER IS NOT RESPONSIBLE OR LIABLE FOR ANY FAILURE AND ACCIDENT FOR WHATEVER REASON AFTER THIS PRODUCT IS SHIPPED FROM OUR PLACE.


ALL TAXES/ LEVIES WHATSOEVER, EXCEPT PRODUCT PRICE AND SHIPPING CHARGES ARE BUYER'S LIABILITY.